Key Benefits to Choosing BioCel Technology Products

1. Instantly Absorbs Sills of All Types
2. Leaves affected area clean and dry and void of de brie
3. Save money by reducing Labor, Downtime and Disposal
4. Quick Clean up
5. Waste Minimization
6. Disposal Options
7. Safe (read more below)
8. Environmentally Friendly (read more below)
9. More absorbent than Clay and other common absorbents

 

Customer Service is our Priority


Sales agents, staff and customer care dedicates and prides .



Enviromentally Friendly


Conservation is exponentially compounded as EcoFiber is used to condition wastewater sludge for maximum de water ability, in effect, reducing the amount of waste discharge to the environment by up to 40 percent. Biocel products are made from reclaimed cellulose fiber that, if not recycled, would contribute to the growing demands the world is placing on its environment. Because of their superior absorption, they greatly reduce the amount of waste that is produced at the cleanup site. Upon being used, the waste created can then either be incinerated (saving a very limited area of landfill space) or even be recycled once again as an alternative fuel source. Quite simply, no other absorbents on the market can offer such a positive impact on the environment combined with the cost effectiveness of our line of absorbents.


Saftey



The K-Sorb product line is non-carcinogenic, nontoxic, and contains no furans or dioxins. Unlike clay, it contains no silica dust, which only causes silicosis, a form of cancer, but is abrasice and can damage expensive machinery, Further, clay becomes slick when saturated with oils, causing probelems for folklifts and pedestrians in the traffic areas, wheres K-Sorb does not.


	K-Sorb Hydrophobic Particulate A densified version of K-Sorb Hydrophobic Fiber. It has the same characteristics as the fiber but it is pourable tin nature and more resistant to windy conditions. K-Sorb Hydrophobic Particulate can absorbs 4 times its weight (over half a gallon per pound) and is used for controlling and remediating CERCLA liquid hazardous waste on land and on open water. It is a cost effective alternative to Absorbent W, polypropylene, and peat moss. In addition, K-Sorb Hydrophobic particulate is used as a filter media to remove oils and greases from contaminated water sources. it is available in 22 lb. bags (approximate 1.5 CF) of loose particulate.
	K-Sorb Eco Fiber A highly absorbent cellulose product used to solidify liquid waste and stabilize sludge for transportation and disposal on remediation projects such as tank cleanouts, lagoon dredging, and pond closures. This specialty fiber is ideal for absorbing free liquid in roll-off boxes and can be disposed of as a solid waste. K-Sorb also satisfied UPA test requirements (i.e., paint filter and TCLP tests) for waste prior to disposal. K-Sorb Eco Fiber can absorb an amazing 13 to 17 times its weight in water and/or oil, meaning less clay, corn cobs, rice hulls, and lime kiln dust. Not only does K-Sorb Eco Fiber reduce and the amount of waste requiring disposal up t 46%, it is made from 98.5% recycled fiber that otherwise would go to a landfill. Furthermore, this product has 8,484 but/lb and burns to less than 3% ash, making it ideal for incineration projects. Inorganic absorbents such as clay, fly ash, and lime kiln dust do not burn which limits disposal options to more costly methods. K-Sorb Eco Fiber is available tin 30lnbf, and 40 lbs compressed bags measures 18 inches x 22 inches x 12 inches.
	K-Sorb Hydrophobic Fiber A loose cellulose absorbent which is oleophilic (readily absorbs oil-based liquids) and hydrophobic (does not absorb water). It is used to absorb hydrocarbons, chemicals, oils, and greases on land and on open water. K-Sorb Hydrophobic Fiber is an excellent choice for solidifying chemical waste and stabilizing oil-based sludge prior to transportation and/or disposal. K-Sorb Hydrophobic Fiber effectively separates free oils from water and can be used to remove contaminants from shores, lakes, rivers, ports, marinas, lagoons, and ponds. It passes US EPA Paint Filter Test Method 9095A after absorbing 13 times its weight (1.8 gallons per lb) in oils, making it much more cost efficient than other cellulose absorbents, sphagnum peat moss, and polypropylene. K-Sorb Hydrophobic's high capillary wicking action instantly attracts hydrocarbons, locking them into its hollow fibers and allows for quick cleanup before the spill spreads. K-Sorb Hydrophobic fiber passes the TCLP and prevents the leaching problems associated with clay, d. e., and polypropylene. Once saturated with hydrocarbons it has absorbed, K-Sorb Hydrophobic's additional 9,809 but/lb and low ash content make it an exceptional candidate for disposal as an alternative fuel source at cement kilns, fossil fuel plants, and traditional incinerators. This product is available in 30 lb. compressed bags measures 18 inches x 22 inches x 12 inches
	K-Sorb Hydrophobic Particulate A densified version of K-Sorb Hydrophobic Fiber. It has the same characteristics as the fiber but it is pourable tin nature and more resistant to windy conditions. K-Sorb Hydrophobic Particulate can absorbs 4 times its weight (over half a gallon per pound) and is used for controlling and remediating CERCLA liquid hazardous waste on land and on open water. It is a cost effective alternative to Absorbent W, polypropylene, and peat moss. In addition, K-Sorb Hydrophobic particulate is used as a filter media to remove oils and greases from contaminated water sources. it is available in 22 lb. bags (approximate 1.5 CF) of loose particulate.



The environment and your budget agree... Make it K-Sorb

Please call 800-551-9956 for free product support and pricing.